Safety Tapes & Stair Nosing

Constructed of a durable 60-grit aluminium oxide compound for excellent durability and longevity in both indoor and outdoor applications. We use a solvent based acrylic adhesive system to allow for adhesion over a wide variety of surfaces, while offering good water and chemical resistance.

Pre-cut to give a finished look to your floor or equipment. The rounded corners reduces the tape from lifting or flagging. Cleats work well for both indoor and outdoor applications.

The Safety Tread Floor Stickers are an excellent way to communicate warnings or hazards in the area, to help prevent unintended injury and death. Ideal for interior factories, workshops, warehouses, hazardous areas and also businesses with bilingual or non-native speakers who can see the safety warning picture if they cannot read the writing. They are easy to install and have an aggressive adhesive backing that sticks well to smooth, clean and dry floors. The thick laminated vinyl textured surface provides a high non-slip traction surface.

Our conformable foil backed non-skid traction tape is for heavy duty textured surfaces and stair nosing applications. The aggressive adhesive and flexible carrier allows for excellent conformability and will hold its shape to almost any embossed or textured surface. This product is ideal for steel tread plate, stair nosing, uneven concrete and most uneven surfaces. This tape has a coarse 46-grit surface - great for indoor and outdoor applications, with excellent weatherability and water resistance.

Resilient textured PVC tape works well in the office, plant, locker room or areas with bare foot traffic. It is ideal for use in wet areas, including showers. The surface has a deep embossed traction pattern that will perform in heavier duty applications, while still being comfortable on bare feet. We recommend this product in office environments and light plant uses. It can be very easily cleaned and will not trap dirt in the way normal grit products can. Suitable for mop cleaning.

Super Brite is an excellent choice for marking anything that requires a high level of night time visibility, and a with a long term life cycle. The tape has an excellent entrance angularity and high intensity micro-prismatic surface. An aggressive adhesive system that will adhere to most any clean, dry surface. High Intensity product has a reflective value of over 4 times that of our standard engineer grade products. Intended for application on relatively flat surfaces only.

Looking for increased awareness? Try out our line of Engineer Grade Reflective tapes. These tapes offer vibrant day-time visibility with reflective properties for night-time use. All tapes are rated for use outdoors with a seven year life span. The aggressive adhesive will adhere to almost any clean, dry, smooth surface. Hazard striped products have a protective lamination to ensure that the printed stripe will not wear off.

Conspicuity tape is a high quality reflective tape which is in full compliance with DOT-C2 requirements. The modular pattern of reflective prisms allow it to be mounted in any position while maintaining full reflective performance. With a typical brightness of 750+ candlepower, it also has one of the industry's highest visibility guidance in wet or dry weather conditions with full reflective strength from distances of 300m and more.

We offer a selection of quality Aisle Marking tapes. These tapes are made from a durable thick vinyl film with a permanent acrylic adhesive system that will adhere to virtually any clean, dry surface. Vinyl offers a matte, smooth, conformable tape that is great for marking hazards on floors, walls and equipment. Also commonly used in pipe banding applications.

These tapes are made from a durable thick vinyl film with a permanent acrylic adhesive system that will adhere to virtually any clean, dry surface. Vinyl offers a matte, smooth, conformable tape that is great for marking hazards on floors, walls and equipment. Also commonly used in pipe banding applications.

Designed to eliminate problems in areas that have been identified as a significant slipping hazard. These plates will assist users in managing these areas with confidence as well as having the assurance of a product that is high in performance and reliability. Even in the most slippery environments (with the presence of water, oils and other slippery substances), the non-skid grit plate’s anti-slip capabilities remain unaffected.

Fibreglass Stair Nosing is a simple, lightweight and cost effective way of making slippery steps and edges safe for all pedestrians. The heavy duty coarse grit finish provides an anti-slip surface and the tapered edge prevents a trip hazard. As an additional measure, Stair Nosing is available with a safety yellow edging to clearly highlight the step edge. This means that even in low light areas, they are easily identified by personnel as a safe area to step on.

Fibreglass Stair Nosing is a simple, lightweight and cost effective way of making slippery steps and edges safe for all pedestrians. The heavy duty coarse grit finish provides an anti-slip surface and the tapered edge prevents a trip hazard.

Fibreglass Stair Nosing is a simple, lightweight and cost effective way of making slippery steps and edges safe for all pedestrians. The heavy duty coarse grit finish provides an anti-slip surface and the tapered edge prevents a trip hazard.

Rubber Stair Nosing is a simple, lightweight and cost effective way of making slippery steps and edges safe for all pedestrians. Provides an anti-slip surface and the tapered edge prevents a trip hazard. *This product has natural rubber in it, may cause a plasticiser migration reaction to occur on PVC & Vinyl floors. We strongly recommend against using this product on Vinyl, PVC & decorative flooring.